I agree Jim, the finger dimples are neat. Also a neat addition to the K2 is
the Elecraft/Bencher Hex paddle...what a great feel! 72
Tony, W4FOA
----- Original Message -----
From: "Jim Sheldon" <[EMAIL PROTECTED]>
To: "'Elecraft Reflector'" <[email protected]>
Sent: Wednesday, March 02, 2005 10:45 AM
Subject: RE: [Elecraft] Rubber Knob for K2
Yeah, but that looks tacky hi hi. The K2 is more elegant than that. Buy
yourself one of those "finger dimples". It looks good on the knob, and once
you get used to it, makes speed-tuning a snap.
W0EB
K2 #4338
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bob Nielsen
Sent: Wednesday, March 02, 2005 9:39 AM
To: [email protected]
Subject: Re: [Elecraft] Rubber Knob for K2
Or as some have done, put a thick rubber band from the
produce department of your local supermarket (as used on broccoli or
asparagus) over the stock knob.
73, Bob N7XY
On Wed, Mar 02, 2005 at 08:10:02AM -0500, W3FPR - Don Wilhelm wrote:
> Dave,
>
> If you are referring to the Yaesu FT-900 knob, you can find
details on
> my website www.qsl.net/w3fpr. The smaller F-100 knob (with finger
> depression) is preferred by some folks, but the FT-900 knob
is heavier
> and my preference. I have also seen the Yaesu rubber tire for the
> FT-900 knob installed over the stock K2 knob - it takes a
small amount
> of stretching, but it works FB if you just want to get rid on the
> sharp outer edge of the stock knob.
>
> 73,
> Don W3FPR
>
> > -----Original Message-----
> >
> > I would like information on obtaining the knob I have
> > seen on some
> > K2's. It apprears to be heavy plastic with a rubber
> > outter edge. Anyone
> > having information such as part number and source
> > please let me know .
> >
> > Thanks in advance,
> >
> > Dave K4SV...
> >
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
