Jim, Those components will not be needed on your K2 (or any other K2 above SN3000) - it already has the components installed for KPA100 support. Elecraft does provide those parts in support of those folks having an older K2 and adding the KPA100.
73, Don W3FPR > -----Original Message----- > > Just starting on a KAP100 for my K2 SN 4787. (BTW, in > my last email I think I quoted the wrong SN.) First > thing out of the chute is an instruction sheet to > change five components and add another to the K2. > There is a note to be sure to re-align the 12m/10 BPF > after completing the mod. Would it be helpful to > remeasure or recalibrate any other functions? Looks > like the second part of the mod is for the VFO ALC. > Or, should I just presume this is low risk? > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
