Hello Stan!
I am not too savvy on this DSP stuff. The denoiser seems a bit
strong for SSB. When I turn it on it seems that it takes a pretty strong
signal for any intelligible audio to make it through. Is this a simple
adjustment in the menus to turn the denoiser gain(for lack of a better word)
down.
Yes, there are three parameters you can adjust: beta (aggressiveness),
decay (how quickly the unit backs off) and "length" (set from 1 through 4).
These are better explained in the manual than I can summarize here in an
email message. Please read those sections of the manual and work
through the examples.
I guess you can tell, and I have to admit, that I have not studied the
custom tailoring instructions yet. The denoiser works great for CW...man
does it work great! If I turn down the SSB denoiser does that affect the CW
denoiser?
Yes, they share the same parameters. You might try going to the DSP
menu and HOLD the STORE button to cycle through the 4 "length" settings.
In the end, though, you'll probably have to play with the various
parameters to find the combination that works best for you.
73,
Lyle KK7P
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
