Okay; I've got it figured out. To get the firmware version for the SSB
unit,
a) select an SSB mode (not CW)
b) go to SSBA menu, and set to BAL
c) leave menu (back to display)
d) press and hold VOX button (the version number will display)
e) return SSBA setting to whatever it was.
My problems, given the initial instructions, were with (a) and (c).
(a) was not mentioned, and my rig is virtually never in SSB mode, and I
tried (d) before leaving the menu (thanks Bob, G3VVT, for this one).
best wishes,
dave belsley, w1euy
On Apr 17, 2005, at 11:44 AM, Gary Hvizdak wrote:
Hi Dave,
I can't confirm the exact procedure for you as I'm still building
my K2.
However, based on Brent's reply, this feature appears to have worked
for
him.
Did you exit the menu before pressing VOX? (The manaual doesn't
provide
any details about this.) Might you have a much older main MCU revision
which doesn't support this feature?
This is indeed a handy feature to have available. I'd suggest
first
checking with Brent about it since he apparently was able to get it to
work.
If that doesn't do it, then Wayne certainly can solve this.
73,
Gary, KI4GGX
K2 #4067
-----Original Message-----
From: David A. Belsley [mailto:[EMAIL PROTECTED]
Sent: Sunday 17 April 2005 1125
To: Gary Hvizdak
Cc: Elecraft Reflector
Subject: Re: [Elecraft] KSB2 firmware
The KSB2 firmware revision can be obtained by first setting the SSBA
menu entry to BAL, then holding the VOX switch. (Return the SSBA menu
entry to its normal setting after checking the firmware revision.)
Well, I had never read this procedure before, so I gave it a try. SSBA
entry to BAL, then held VOX and got . . . nothing.
Is there something else that need be done?
thanks,
dave belsley, w1euy
--
I am using the free version of SPAMfighter for private users. It has
removed
406 spam emails to date. Paying users do not have this message in their
emails. Try www.SPAMfighter.com for free now!
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
