On 7/25/2010 10:28 AM, Don Wilhelm wrote:
> If you mean that the red and black housings come apart, put a
> drop of superglue on the mating surfaces and they should be
> tight. There is a hole intended for a roll-pin, but often the
> roll pin comes out and gets into places no metal should be, so if
> you do use a roll-pin, secure it with a bit of superglue.
I have found that using the smallest size cable tie
a.k.a."Ty-Rap" (tm) through the holes serves to keep the
connectors together and the bodies from separating. Easy
enough to separate if needed.
-- 73 de K2ASP - Phil Kane
Elecraft K2/100 s/n 5402
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
