Hmmm... What are the BAUD rates for the RS232 and the K3? Do they still match? You didn't mention that in your post.
Steve WU9B On Jul 29, 2010, at 12:20 AM, [email protected] wrote: > Dear Elecrafters! > Since few days ago, my K3 (S/N3050) has no response from its RS232 port. > First no frequency data became obtained by Logger32. > Then, I tried to connect by K3 Utility, I tried port refresh, port > test,etc. But no reply from the K3. > I confirmed K3 Utility program is sending polling signal to K3 RS232 port > but seems no reply from K3. > > I use USB/RS232 converter between P/C and the rig. > I changed the connection with other rig such as FT-2000, and it works > without problem using same com port, so that I'm sure the RS232 of K3 is > something wrong. > > I'm afraid if K3 got a kind of surge damage because we had a bad wx with > lightening just before the reported malfunction occur. > > I posted same question to tech support but if anyone had same problem > please advise how to fix this problem. > > vy 73 > Atsu, JE1TRV from Tokyo Japan > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
