I tried to connect LP_Bridge passing through the P3 to the K3 (the P3 is supposed to be transparent to apps connecting to the K3 I understand) and LP_Bridge failed to connect to the K3. Everything is set up to run at 38400 baud and it worked fine without the P3 there. After fooling around with it, I found that if I turned the P3 off before starting LP_Bridge, it would connect to the K3. I could then turn on the P3 and everything seems to work fine after that. I thought the P3 was supposed to be transparent as far as RS-232 connections through to the K3 are concerned but it seems that it isn't. It doesn't seem like a significant problem since there is an easy workaround but it is a little annoying. Has anyone else run into this?
73, Ted, W2ZK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
