Phil, I am not certain if you or someone else originally asked the question - but -- The K3 can provide a lower power RF source for tuning. As others have mentioned - first set the Tune power in the menu. Then use TUNE (not ATU TUNE) and the K3 will transmit at the power you set in the menu.
How you command the tuner to initiate its tune is quite a different matter. Perhaps RF sensing is appropriate - or one would put the K3 into TUNE and then operate the TUNE button for the tuner. 73, Don W3FPR On 8/24/2010 8:56 PM, Phil & Debbie Salas wrote: > "The K3 should certainly be able to handle a relay-switched tuner on > short-term tuning without a problem ... it certainly does with the > KAT-3." > > I believe that the K3 tunes with low power (5 watts?) when using the KAT3. > The thought of running the K3 at full output into momentary infinite SWR > conditions as autotuner relays switch makes me somewhat uncomfortable. > > Phil - AD5X > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
