I believe this problem is caused by setting the CW WGHT option 5 to VFO OFS. Try setting it to VFO NOR and see if the problem goes away.
I seem to recall having had problems like you are now experiencing when this option was introduced many versions ago. 73 de Brian/K3KO Dave Perry N4QS wrote: > My K3 (SN 3132) has been working happily in sync with DX4WIN and N1MM for > over a year now. Normally, when I double click on a spot within the DX spot > window of DX4WIN, the K3 immediately changes to the correct spot frequency > and mode. Same goes with N1MM. > > Just a few days ago I noticed that the K3 is not always changing to the > correct frequency. The problem appears to occur when a spot causes a change > in both frequency and mode. For example, if VFO A is set on 14.008.00 CW-R > and I see a SSB spot for 14200.00, when I double click on the spot, the K3 > changes to 14.199.42 instead of 14.200.00. Then if I click on a spot to go > back to 14.008.00 the K3 changes to 14.008.58. In both instances I have to > double click on the spot a second time to get it to change to the correct > frequency. Note that the difference is +/- 0.58 kHz. The problem also > occurs when switching from SSB to RTTY. It also seems to be occurring using > both normal CW and CW-R. > > Last week I loaded the new 4.05 firmware. I am now wondering is this is a > problem with the firmware. Or have I somehow changed a setting? The K3 > worked perfectly for over a year. Something has changed. Any help would be > appreciated. > > Dave, N4QS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
