Hi
Thanks for getting back to me so soon.
<<Have you set the jumpers in MK II for an electret mic? >>
I've connected
(i) the jumper to the 2 pin connecter in fron of the middle pot
(ii) the jumper on the two pins (EL) of three pins near to the EXT MIC
(iii) the jumper on the PA-RE-SS covers the two pins at the PA end
(iV the jumper on the LNA-RE-SS covers the two pins ont the LNA end
I have not connected
(i) the jumper onto the ICVOX pins
(ii) the jumper on J11 near the power input.
<<Have you set Router to select the rear mic ("Microphone
Selector" on the Audio Switching tab)?>>
Yes
<<What adapter are you using between the ProSet K2 and
the Foster to RJ-45 adapter connected to the rear of
the MK II? >>
The one that was supplied with the rest of the cables - bought new from
microHam.
<<Have you set the "EXT MIC" jumper for IC and tried using
the EXT MIC (3.5mm) jack on the front of MK II? >>
<<Please refer to the user manual>>
I am.
I must be doing something wrong but I can't find it.
TIA
Bill
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-microKeyer-2-setup-tp5492196p5492595.html
Sent from the [K3] mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
