Updated to 4.10 firmware plus 1.3.9.3 Utility both #311 and #1435.
When I run RF Calibration using the XG-2 and selecting "Compute REF Gain using a signal source" on both rigs I get the following error: Upper display - "E 040 16A" Lower display - "ERR DSE" Have to power down to get rid of the error and to hear the sidetone. Then the signal is only S-5 using the XG-2. Then I tried RF Calibration "Using factory default RF Gain Calibration data". Everything seems fine but no audio. If I move the AF Gain Control I get the following error: Upper Display - "E 041EA6" Lower Display - "ERR DSE". But still no audio. Power down and up and audio seems fine with S9 with XG-2 now connected. Tried reloading the firmware and even going back to 4.03. Same result. Anyone have this happen? Any ideas? RF Calibration always worked before. Is this a cockpit error on my end? Tnx N2TK, Tony ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
