Hi Alan,
Ill admit I didnt try a narrower span and I normally use the +-15Khz setting (30Khz span) on the 160 meter cw band. Ill try narrowing it up and see if it picks up the very weak signals but I dont want to operate on a too narrow span or, as they say, it becomes much less useful to me. 73 Larry "However the carrier is clearly visible on the waterfall if I set the P3 span to 2 kHz. As I increase the span the signal gradually gets harder and harder to see. Above about 30 kHz or so the signal disappears into the noise. So that's the trick. Narrow the span to make those signals pop out of the noise. " 73, Alan N1AL -- View this message in context: http://elecraft.365791.n2.nabble.com/LP-Pan-versus-P3-Panadapters-tp5528469p5532080.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
