I loaded the beta updates with zero problems. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Buck Sent: Sunday, September 19, 2010 12:07 PM To: [email protected] Subject: Re: [Elecraft] New K3 & P3 Beta Firmware Available
Given a number of reports about trouble downloading the latest K3 and P3 firmware, I decided to report my success conditions. K3#125, P3#159, P3 power switch setup to turn on automatically with the K3 but can turn off P3 power after K3 power up. P3 connected to computer running XP. P3 connected to K3, also Steppir SDA100 controller hanging on the K3 line as a read only device. P3 utility 1.3.8.25, K3 utility 1.3.9.3 P3 power is not supplied by the K3, but comes directly from a Rigrunner power distribution box from the station 12 volt supply. Turned off P3 power switch. Ran K3 utility and downloaded the K3 update. A snap after I found the ftp files. Closed the utility file. Then cycled power switch on the K3. Then ran the P3 utility and downloaded the P3 update. Cycled power after closing the utility. All is well. It is really worth it. John KH7T ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
