Scott, The filter "presets" I/II are not fixed presets. The manual calls them "floating" presets. If you happened to have setting II active at the time you pressed the NORM button, the II setting would have been changed to the NORM setting.
If you want fixed presets, you need to use the custom settings (NORM1 and NORM2). You could think of the I/II settings in somewhat the same way as you think of the two VFOs, whereas the NORM1/2 settings are more like frequency memories. 73, Rich VE3KI K9MA wrote: > Just getting to know the K3, so this may be pilot error, but the filter > presets seem to behave strangely. With the 2.8 and 2.1 kHz filters enabled > for USB, for example, I saved them as presets I and II. That seemed to work > with the I/II switch, until I held the NORM switch once. After that, I/II > would not switch to the 2.1 kHz filter. Behavior was similar in CW mode. Am > I missing something? > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
