Jeff, I strongly agree with Don. MMTTY integrates VERY nicely with both WriteLog and N1MM. I use N1MM. You're welcome to come up here and see it this weekend. I'm not taking it seriously, but I will get on and play a bit.
73, Jim K9YC On 9/24/2010 5:40 PM, Don Wilhelm wrote: > Jeff, > > If you are not accustomed to RTTY (or other digital modes) operation, I > would encourage you to use a computer application to start out with. > Clicking on the waterfall display to decode signals is much easier than > tuning the signal to a spot which will allow good decoding in the K3 VFO > B area (or using K3 Utility Terminal - same thing). > Once you have developed a feel for the RTTY mode, then you can advance > to using the K3 Utility or the K3 VFO B area for decoding. > > If you insist on using the VFO B display or K3 Utility, set the AFSK-A > (or FSK-D) menu parameter to the baud rate of the station you are trying > to copy (it will usually be 45 bps), then use the dual passband to > reject unwanted signals - tune the K3 carefully using CWT so you see 3 > bars on each side of the center marker. You should then see good > decoded text. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
