On Fri, Sep 24, 2010 at 18:10, Jim Brown <[email protected]> wrote: > Jeff, > > I strongly agree with Don. MMTTY integrates VERY nicely with both > WriteLog and N1MM. I use N1MM. You're welcome to come up here and see it > this weekend. I'm not taking it seriously, but I will get on and play a > bit.
Jim and Don, thanks for the input. I think I got it working sort of, enough to make a few QSOs. Jim, I may take you up on that...I'll be in touch if I can make it up. Thanks! Jeff > 73, Jim K9YC > > On 9/24/2010 5:40 PM, Don Wilhelm wrote: >> Jeff, >> >> If you are not accustomed to RTTY (or other digital modes) operation, I >> would encourage you to use a computer application to start out with. >> Clicking on the waterfall display to decode signals is much easier than >> tuning the signal to a spot which will allow good decoding in the K3 VFO >> B area (or using K3 Utility Terminal - same thing). >> Once you have developed a feel for the RTTY mode, then you can advance >> to using the K3 Utility or the K3 VFO B area for decoding. >> >> If you insist on using the VFO B display or K3 Utility, set the AFSK-A >> (or FSK-D) menu parameter to the baud rate of the station you are trying >> to copy (it will usually be 45 bps), then use the dual passband to >> reject unwanted signals - tune the K3 carefully using CWT so you see 3 >> bars on each side of the center marker. You should then see good >> decoded text. > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
