I wonder if Mike was having trouble finding the "rf cal" position. That should be found by turning the VFO A knob CLOCKWISE from the NOR setting that you find it on when you select VCO MD in the config menu. 73, Guy.
On Mon, Sep 27, 2010 at 10:32 AM, Don Wilhelm <[email protected]> wrote: > Mike, > > Read the manual menu chart of menu explanations and you will discover > better than I can tell you. > If you set it back to NOR 127, then exit the menu and change bands, it > will be restored to the prior settings. > > Since the calibration is more or less automatic, I see no problem in > re-doing the calibration, so (in TECH MODE) set it to CAL and exit the > menu - it will be done. > > 73, > Don W3FPR > > On 9/27/2010 10:02 AM, VE3WDM wrote: > > Don' > > Have I changed any of the synthesizer settings when I rotated the VFO > knob > > earlier and changed the RF settings. I was not sure if I also changed the > > NOR setting in this menu either? But I hope with the MD setting to off > > nothing was changed. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
