Mike, I don't know the answer to your #1 question, but the #2 question, the K3 is telling you that you have the sub set to a band that is higher in frequency than the main RX. When that is the case, you should be using the AUX antenna because the Low Pass Filters are set for the band the main has tuned (necessary for transmit), and will substantially attenuate the subRX input signal.
The solution is to either always set the sub to a band lower than the main or to use the sub's aux antenna input. 73, Don W3FPR On 9/28/2010 9:38 AM, Mike Weir wrote: > I have had a chance to play with my new KRX3 and had a few questions. > 1. When listening to CW with the sub VFO I can't get the spot function to > work with the sub, is that just not available yet? > 2. While listening to one band on the main VFO and a different band on the > sub (not in diversity mode) every so often in the sub I get AUX ANT. I can't > switch to that particular band unless I flip the band from the sub to the > main and the main to the sub. Then all is well, is this the affect of the > band pass filters the manual is talking about? If so I will just have to keep > track of the band that is in the sub and main. > Mike > http://ve3wdm.blogspot.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
