I have the same problem, except that I get no decode display whatsoever on the K3 Terminal program even with the P3 off (except occasional lines of gibberish)! Display on the K3 VFO B is fine, as is text transmission from the K3 Terminal program to the K3. I am using the newer FTDI based Sabrent USB to serial adapter. I know I'll need to wait for the TB command implementation, but I'm suspicious that decode does not work even with the P3 off.
John W3DN On 10/5/2010 2:47 PM, Alan Bloom wrote: > Currently the K3 Utility's text decode display does not work when the P3 > is turned on. That is because it uses the old K3 "TT" (Text to > Terminal) command which is not supported by the P3. K3 Utility is going > to be modified to support the new "TB" (Buffered Text) command so that > it can display text with the P3 connected. (TB actually works better > than TT even without the P3.) I'm not sure what the time frame is for > that. Perhaps Dick can comment when he returns from vacation. > > Alan N1AL > > > On Tue, 2010-10-05 at 12:12 -0500, Oscar Staudt wrote: >> When P3 is turned off, I start the K3 Utility, and I will see my text decode >> data (both CW and PSK) in the VFO B window, and in the K3 Utility Terminal >> window. However, when the P3 is turned on, the data is still shown in the >> VFO B window, but does not show up on the K3 Utility Terminal screen. >> >> K3: 4.112 >> P3: 00.36 >> >> I thought I read something about this on the reflector recently, but I've >> been searching and can't find it. I don't remember if this was a firmware >> glitch to be fixed, or ...? >> >> Thanks gang! >> >> Oscar, WB5GCX >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
