I get something similar here. The problem only happens after pressing REV. If you then press A/B the P3 stays on the VFO A frequency. The P3 is not actually frozen, but it won't show VFO B until it is powered down and then up.
(K3 Firmware 4.12; P3 Firmware 00.38) 73 de David G4DMP In a recent message, W9HAK <[email protected]> writes > If I push the "REV" button on the K3, the displayed center frequency >on the P3 freezes. The K3 responds correctly, that is, it shows "VFO >B" frequency. And when I let go of the button it reverts to "VFO A". >But the P3 center frequency is frozen on the K3 "VFO A" frequency. The >only workaround is to turn off the P3. Kind of a pain since I use the >"REV" button to coach on the 'VFO B" while working split operation. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
