For those that responded thanks, I did a search of the archives and Al Bloom is aware of this issue. So I will continue to have fun and let someone else worry about the software fix.
Smith W9HAK On 10/7/2010 9:17 AM, David Pratt wrote: > I get something similar here. The problem only happens after pressing > REV. If you then press A/B the P3 stays on the VFO A frequency. The P3 > is not actually frozen, but it won't show VFO B until it is powered down > and then up. > > (K3 Firmware 4.12; P3 Firmware 00.38) > > 73 de David G4DMP > > In a recent message, W9HAK <w9...@insightbb.com> writes >> If I push the "REV" button on the K3, the displayed center frequency >> on the P3 freezes. The K3 responds correctly, that is, it shows "VFO >> B" frequency. And when I let go of the button it reverts to "VFO A". >> But the P3 center frequency is frozen on the K3 "VFO A" frequency. The >> only workaround is to turn off the P3. Kind of a pain since I use the >> "REV" button to coach on the 'VFO B" while working split operation. > > > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.862 / Virus Database: 271.1.1/3182 - Release Date: 10/07/10 > 01:34:00 > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html