Bill, Please explain what you mean by "with kat100 fitted". The KAT100 is an external option in its own enclosure and connects the the K2 (or KPA100) AUX I/O connector via a cable. The receive (and transmit) path between the K2 and the KAT100 is through a coaxial cable.
Once you explain your entire setup for each K2, then perhaps I can help, but right now I am confused about what you have. Also, does the K2 work without the KAT100? Do you have the KPA100 installed in each K2? If not, do you have the KIO2 installed? Or rather, do you mean the KAT2 which is a 20 watt tuner that installs in the QRP top cover of the K2? 73, Don W3FPR On 10/8/2010 5:47 AM, William Joiner wrote: > Hi Don > > I have two K2's one with kat100 fitted one without. I wanted to fit the > kat100 into the second unit. The amp works but I do not get receive audio > > I have looked into the menu's and can not see one that tells the receive path > to go via the kat100 unit. Any idears? > > Bill G4OAX > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
