Just when you think you have seen everything, something comes along and bites you in the b*m.
Having completed yet another mod to my K2, I put it back into it's rightful place on the operating desk, connected the KAT100/KPA100, PSU, desk microphone, computer leads, and then switched on. The K2 was set to 40m and I could hear signals, but also I was getting audio feedback from my microphone and this was on RECEIVE ! Thinking that something had not powered up correctly, I powered the K2 off then on - still the same problem. Must be some Menu setting that I had forgotten, so press the Menu button - nothing changes on the display - What the *!&*$ ? NONE of the secondary functions of the front panel work. What have I blown up ? Decided to take the K2 cover off and see what I had messed up with the latest mod. Removed the K2 from the back of the operating desk, and started to disconnect all attached cables. Then I found it..... Instead of plugging in the 3.5mm plug on the foot switch into the Key socket I had plugged in the 3.5mm plug from the soundcard !! Everything works fine now the correct plugs are in the correct sockets. You live and learn... 73 Stewart G3RXQ _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
