Current production firmware is MCU 04.12 FPF 01.13 DSP 02.60
On the firmware tab of the K3 Utility, check the "copy new files from Elecraft into local folder" and click "check versions now". This should fetch the current firmware into your computer. Then press "Send All Firmware". Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Juha Kasari Sent: Monday, October 18, 2010 8:12 AM To: Wayne Burdick Cc: [email protected] Subject: Re: [Elecraft] K3 config menu problem Hello, I have now MCU 04.12 FPF 01.09 DSP1 02.58 I used "Send All Firmware to K3". Is these ok? juha 2010/10/18 Wayne Burdick <[email protected]> > Juha, > > You probably have the wrong revision of the "FPF" firmware file loaded. > When you load firmware, be sure to load all files, including FPF. > > 73, > Wayne > N6KR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
