Tnx. I did like you said just before I read your message ;).
Now config menu Is OK!!!! Thank you everybody for helping. juha 2010/10/18 Dick Dievendorff <[email protected]> > Current production firmware is > > MCU 04.12 > FPF 01.13 > DSP 02.60 > > On the firmware tab of the K3 Utility, check the "copy new files from > Elecraft into local folder" and click "check versions now". > This should fetch the current firmware into your computer. Then press > "Send > All Firmware". > > Dick, K6KR > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Juha Kasari > Sent: Monday, October 18, 2010 8:12 AM > To: Wayne Burdick > Cc: [email protected] > Subject: Re: [Elecraft] K3 config menu problem > > Hello, > > I have now > > MCU 04.12 > FPF 01.09 > DSP1 02.58 > > I used "Send All Firmware to K3". Is these ok? > > juha > > 2010/10/18 Wayne Burdick <[email protected]> > > > Juha, > > > > You probably have the wrong revision of the "FPF" firmware file loaded. > > When you load firmware, be sure to load all files, including FPF. > > > > 73, > > Wayne > > N6KR > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
