My guess is that you need to do the RF Gain Calibration procedure with the K3 utility. If you have an XG1 or XG2 you can use it as a calibrated source, or if not you can tell the utility to use the factory default settings.
On 10/20/2010 8:13 PM, Mike wrote: > Tonight I noticed that from about 2:00 to 2:30 on the RF gain encoder, the > receiver > goes dead. It's not dependent on the THR or SLP settings which I adjusted to > match > some advice given here short time past. > > I also realized my S-meter doesn't rise as the RF gain is reduced. I like > that, but I > don't know how it got that way. :-P > > I have the latest firmware. > > It's not really a big deal, but is is puzzling. > > 73, Mike NF4L > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html -- Vic, K2VCO Fresno CA http://www.qsl.net/k2vco/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
