Thanks, Vic. Per Dale's suggestion I did a calibration using factory defaults, and the dead spot is gone, and the S-meter is back to rising with a decrease of RF gain. Dagnab it.....
73, Mike NF4L On 10/20/2010 11:50 PM, Vic K2VCO wrote: > My guess is that you need to do the RF Gain Calibration procedure with the K3 > utility. If > you have an XG1 or XG2 you can use it as a calibrated source, or if not you > can tell the > utility to use the factory default settings. > > On 10/20/2010 8:13 PM, Mike wrote: >> Tonight I noticed that from about 2:00 to 2:30 on the RF gain encoder, the >> receiver >> goes dead. It's not dependent on the THR or SLP settings which I adjusted to >> match >> some advice given here short time past. >> >> I also realized my S-meter doesn't rise as the RF gain is reduced. I like >> that, but I >> don't know how it got that way. :-P >> >> I have the latest firmware. >> >> It's not really a big deal, but is is puzzling. >> >> 73, Mike NF4L ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
