John, Most K2s will do that on occasion. It normally happens when the firmware is doing many tasks. If it is frequent, then you may have a problem, but just occasionally, no problem.
73, Don W3FPR On 10/21/2010 5:25 AM, VK7JB wrote: > Hello All, > > My base K2 is completed and KSB2, KNB2 and KDSP2 modules are installed and > working well. I'm relieved. Thanks to Don for his reassurance along the way. > > I've noticed a quirk with the display of my K2 and can't find it mentioned > in the archives. While tuning with the VFO, the display will jump for an > instant between either the power display or the keyer speed display. It is > a very transient switch between the two displays. It occurs infrequently > and I can't predict it. Changing the position of the keyer speed and power > pots, in case they are close to some critical voltage position, hasn't > changed the glitch. This makes no difference to the function of the K2, so > I'm just ignoring it, but I'm wondering if its particular to my K2, or if > others have noticed this. Seems to me like it might be a processor issue. > > Now on with the KPA100... > > Thanks and 73 > John > VK7JB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html