Yes APF came out reel good, very well done! Don´t even know if it was this good on the FT-1000D, at least not on the units I did own.
Now if only AM RX was to be fixed I would be happy, as it is right now AM (not sync AM) RX is more or less useless. It "got broken" in the DSP code way back. I have written about this problem before and I´m not going to repeat myself any further. / Jim SM2EKM --------------------------------- On 2010-11-04 00:17, Bill [NS4C] wrote: > > I loaded the beta firmware so I could see what all the APF buzz was about. > 3D2A was spotted on 18070 so I turned the beam and he was there in and out > of my noise level. I turned on the new APF function and peaked the CW > signal. He was now 100% copy. Turned APF off and he was in and out of my > noise level again. Now I understand how good of a tool APF is for weak > signal CW. BTW The 3D2A is in my log. > > Many thanks Elecraft, > > 73 Bill NS4C > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
