Ah - I see you did have averaging turned on. Yes, averaging over less samples will reduce this as it needs to recalculate the display average when the frequency is changed. Turning off averaging on the P3 will eliminate this and make it act like your other display.
73, Eric On 11/10/2010 4:50 PM, Gene wrote: > I recently put p3 S/N 712 on line and notice the spectrum display is > very jumpy as I tune up and down the band. > > A) Is there an ideal refresh rate or a value one should start with? > B) Would this vary as band conditions change? > C) Is the rate tied in with averaging time? > > I am used to seeing the spectrum display as on a ProII that I had, very > steady and not jumpy. Any help would be appreciated. > > Thanks, Gene > W2BXR > K3, 1188 > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html