13.8V from an Alinco DM-330MW switcher Mike VP8NO
----- Original Message ----- From: "Guy Olinger K2AV" <[email protected]> To: "Mike Harris" <[email protected]> Cc: <[email protected]> Sent: Tuesday, November 23, 2010 6:04 PM Subject: Re: [Elecraft] K3 LEDs light up, but won't come to life What is the power supply supply voltage? 73, Guy. On Tue, Nov 23, 2010 at 3:58 PM, Mike Harris <[email protected]> wrote: > Hi, > > I've started to notice this in the past couple of months. I turn > the PSU off for a few seconds, then back on and all is OK. It has > happened maybe a dozen times. > > Regards, > > Mike VP8NO > > ----- Original Message ----- > From: "Eric Rosenberg" <[email protected]> > To: <[email protected]> > Sent: Tuesday, November 23, 2010 5:49 PM > Subject: [Elecraft] K3 LEDs light up, but won't come to life > > >> thi has happened three times: >> >> I turn on the K3, the LEDs on the four knobs under the display >> light up, but >> the display stays dark and I cannot power it off with the power >> button. >> >> I have to disconnect the power, wait a little bit and re-connect >> the radio. >> It comes back to life when I power it on. >> >> What's happening? >> >> Eric W3DQ >> Washington, DC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
