Yep. I have the same problem, or at least had it, since I haven't tried it for quite a while. I've tried all sorts of things including a (gasp!) real serial port, and nothing worked.
The most peculiar thing is that I have no problem re-flashing the KRC2, but I can't change the configuration with the configurator program. I need to do this so I can drive a 3 of 8 encoded remote antenna switch. I even took hi-res shots of both sides of the completed PCB, and emailed them to Elecraft support (at their request), but aside from being told they were very good shots, I never heard back. I'm finally about to complete my antenna system, and it would be nice to be able to use the KRC2 for what I bought and built it for. 73, -- Dave, N8SBE > -------- Original Message -------- > Subject: [Elecraft] KRC2 Config Software Problem > From: "K3RWN" <[email protected]> > Date: Tue, November 23, 2010 8:02 pm > To: <[email protected]> > > > Has anyone had an issue with trying to get the PC to send program data to > the KRC2 Config Utility? > > > > I have tried everything, USB adapters (several), real com ports, different > PCs and Laptops. > > > > I am stuck > > > > Rich > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
