Yes, there are a few occasions when the NR in my K3 is effective. However, there are indeed far many occasions when I have to massage around the 4 x 8 = 32 settings and I do not find it easy to identify one to suit the then situation.
On the other hands, I simply set the NR knot at 10-11 o'clock in my Icom families. This will suit 90% of the situation with little artifact and less listening fatigue. cheers, Johnny VR2XMC ----- 郵件原件 ---- 寄件人﹕ The Smiths <[email protected]> 收件人﹕ [email protected]; Elecraft Reflector <[email protected]> 傳送日期﹕ 2010/11/29 (一) 1:26:29 PM 主題： Re: [Elecraft] K3 Noise Reduction Performance I have to disagree. I have serious QRM at my location and when I use settings 2-5 with Med 2 IF on my NR, it cleans up ALL of the electrical noise in my area. I ALWAYS drop at least 3 S-Units of noise each time I turn mine on. However, if there can be even more improvement than I'm all for it. T. Smith > From: [email protected] > To: [email protected] > Date: Sun, 28 Nov 2010 16:27:56 -0500 > Subject: [Elecraft] K3 Noise Reduction Performance > > I have two K3s and the NR is the same on both. If I had to identify a feature >on the K3 that needs improvement, I would have to say it is the NR. I cannot >find a noise reduction setting that is suitable to me. I realize this is a >subjective, and you would have to compare the K3s noise reduction with that of >another radio. I have owned the Ten-Tec Omni VII which in my opinion has the >best NR on SSB without a doubt. I believe it is all in the NR programming and >how the algorithms are set up. There has been considerable improvement from >the >time the K3 was introduced, but I believe there is still room for further >improvement. I would like to see noise reduction with a minimum loss of signal >fidelity. Roy Morris W4WFB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
