Hi Ken, That is not my intent. What I'm trying to do is combine both L&R audio channels from the K3's phone output into a mono signal. That mono signal will then go into my BHI ANEM which only accepts a mono input. The ANEM's output is also mono. I then want to be able to connect my stereo headphones into the ANEM and still get audio out of the L&R cans rather than just one.
I can't seem to determine exactly what adapter is required. Is it a mono plug to stereo jack, or stereo jack to mono plug? I have one of these, which is a stereo plug to mono jack adapter, but mixes both L&R sources into a single channel: S2M-Adapter-250.gif<http://www.scansound.com/xcart/images/P/S2M-Adapter-250.gif> I'm assuming then that I'll need this, which is a mono plug to stereo jack: Mono-to-Stereo-Adapter-250.gif<http://www.scansound.com/xcart/images/P/Mono-to-Stereo-Adapter-250.gif> I also assume that it's safe to bridge both L&R channels from the front or rear phone (not SPKR) jacks? 73, James K2QI On Thu, Dec 2, 2010 at 9:52 PM, Ken - K0PP <[email protected]> wrote: > Hi James, > > If you're wanting this adapter to be used with the K3's > speaker jack on the rear of the radio, DON'T do it. (;-) > > 73! > Ken Kopp - K0PP > [email protected] > http://tinyurl.com/7lm3m5 > -- 73 de James K2QI President UNARC/4U1UN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
