OK, I think I got it now... Here's what I plan to do:
Stereo to mono adapter -----> ANEM AF DSP ------> mono to stereo adapter -------> headphones. The stereo to mono adapter that I already have will combine audio from both main and sub receivers into a single channel. The mono to stereo adapter on the other end of my headphones will then take that mono signal and output into both cans for a simulated stereo experience. 73, James K2QI On Thu, Dec 2, 2010 at 10:02 PM, James Sarte (K2QI) <[email protected]>wrote: > Hi Ken, > > That is not my intent. What I'm trying to do is combine both L&R audio > channels from the K3's phone output into a mono signal. That mono signal > will then go into my BHI ANEM which only accepts a mono input. The ANEM's > output is also mono. I then want to be able to connect my stereo headphones > into the ANEM and still get audio out of the L&R cans rather than just one. > > I can't seem to determine exactly what adapter is required. Is it a mono > plug to stereo jack, or stereo jack to mono plug? > > I have one of these, which is a stereo plug to mono jack adapter, but mixes > both L&R sources into a single channel: > S2M-Adapter-250.gif<http://www.scansound.com/xcart/images/P/S2M-Adapter-250.gif> > > I'm assuming then that I'll need this, which is a mono plug to stereo jack: > Mono-to-Stereo-Adapter-250.gif<http://www.scansound.com/xcart/images/P/Mono-to-Stereo-Adapter-250.gif> > > I also assume that it's safe to bridge both L&R channels from the front or > rear phone (not SPKR) jacks? > > 73, > James K2QI > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
