Tom, I believe that is time to put the K3 into diversity receive which should stop the "whooshing" if it is related to frequency/phase differences within the receiver. Without the phase locking that is inherent in diversity mode, that "whooshing" is a natural consequence of slight phase and frequency differences.
OTOH, if it is related to phase differences coming from the antennas, there is no cure without work at the antennas - the receivers are doing their proper job of translating their independent RF inputs to baseband audio. In diversity mode, the audio will be heard from both channels and it is up to the human brain to figure out which one is the best to listen to 73, Don W3FPR On 12/6/2010 7:49 PM, Amateur Radio Operator N5GE wrote: > I would like to see a section describing how to zero beat the 2nd RX to the > main > to stop the ?whooshing? when it gets near one or two Hz of zero beat. > > Can this be done? > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
