On 12/13/2010 12:49 PM, Andrew Meyer wrote: > My main reason for this email to the reflector, is for help on the cable > types and connections and/or an article that explains the setup and > configuration that works. I had considered using a Signal Link but is there > really any reason to do so?
Plain ordinary cabling of good quality is all you need, provided that you do the simple bonding from chassis to chassis of all interconnected equipment described in my tutorial on Interfacing ham gear to computers. While my material is written for SSB, RTTY, and PSK with an emphasis on contesting, all the principles apply 100% to your application. See http://audiosystemsgroup.com/HamInterfacing.pdf for a Power Point that I've used for several presentations at clubs and hamfests, and http://audiosystemsgroup.com/RFI-Ham.pdf for the same material in text form. It's in the chapter on "Solving Problems In the Shack." 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
