I'm unable to transmit an AFSK signal in DATA mode, although I can transmit via the same LINE IN in DATA A mode. The line output from my SignaLink USB soundcard does have the audio signal on it and is connected to the Line In mono jack on the K3. For MIC SEL in configuration, I have Line In selected. DATA MD is set to AFSK A and shows 45 bps. PITCH is set to 915-170. Using MMTTY software and the latest K3 firmware the K3 goes into transmit mode (audio signal is present on cable feeding K3's Line In) but no modulation. What am I missing??
I should mention this was working as early as 3 weeks ago and I have NO idea what has changed. Just reloaded the K3 firmware and checked all MTTY option parameters but all look good and as I mentioned..Data A xmits the RTTY signals but not AFSK. Larry K1UO -- View this message in context: http://elecraft.365791.n2.nabble.com/AFSK-tp5845592p5845592.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
