Is MMTTY set to transmit 915 Hz? Wes N7WS
--- On Fri, 12/17/10, Larry K1UO <[email protected]> wrote: > From: Larry K1UO <[email protected]> > Subject: [Elecraft] AFSK > To: [email protected] > Date: Friday, December 17, 2010, 10:51 AM > > I'm unable to transmit an AFSK signal in DATA mode, > although I can transmit > via the same LINE IN > in DATA A mode. The line output from my SignaLink USB > soundcard does have > the audio signal on it and is connected to the Line In mono > jack on the K3. > For MIC SEL in configuration, I have Line In > selected. DATA MD is set to > AFSK A and shows 45 bps. PITCH is set to > 915-170. Using MMTTY software and > the latest K3 firmware the K3 goes into transmit mode > (audio signal is > present on cable feeding K3's Line In) but no > modulation. What am I > missing?? > > I should mention this was working as early as 3 weeks ago > and I have NO idea > what has changed. Just reloaded the K3 > firmware and checked all MTTY > option parameters but all look good and as I > mentioned..Data A xmits the > RTTY signals but not AFSK. > > Larry K1UO > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/AFSK-tp5845592p5845592.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
