Hello, When selecting memory #2 (3.922) from a higher Memory numbers, #3 (3.930), #4 (3.941), #5 (3.963), #6 (3.916), #7 (1.900), #8 (7.290), etc, etc, RELAYS can be heard as the VFO knob is turned counter clockwise and correct frequencies are displayed with TX/RX functions operating normally. When Memory #3 (3.930) shows up, the RELAY functions and all is normal, ie TX/RX. Then as I continue to select Memory # 2 (3.922), no RELAY is heard and the frequency displays correctly but there is no TX/RX. Then continuing to Memory #1 (3.825), a RELAY functions, TX/RX is normal. Switching back to Memory #2 the RELAY functions, TX/RX is normal and all is well.
Any one experience this anomaly? I do not recall it being that way with the previous Firmware MCU 4.14 / DSP 2.60 / FPF 1.13, October 6, 2010. I have 4.22 Firmware loaded now. Thanks Griff....N5AG I know some things about a few things and I know little about a lot of things!! ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
