ta daaaa! I knew there had to be a simple fix Thank you Joe and also thanks to everyone else for their input I now have quiet XMIT and a happy XYL 73 Paul, NU4C
________________________________ From: "Joe Subich, W4TV" <[email protected]> To: [email protected]; [email protected] Sent: Wed, December 22, 2010 5:48:24 PM Subject: Re: [Elecraft] muting audio on PSK Paul, Are you aware that the MON level is saved on a per mode basis? Did you check MON while in Data mode (assuming you are using DATA A for PSK31)? 73, ... Joe, W4TV On 12/22/2010 5:04 PM, Paul Milward wrote: > tnx for all the responses > I have a pair of stereo speakers connected to the back of the K3. I also have a > Yamaha headset connected, both the speakers and headset are always active. This > setup allows me to monitor from across the room and also to rapidly access the > headset when necessary. Obviously I do not need audio for PSK. Received audio >is > easily silenced by setting audio gain to zero, but transmit audio is always > present regardless of the Power setting. The MON=0 and the audio is produced in > the k3 not the computer. > I use a pair of stereo cables from the I/O on the back of the rig to the >(audio) > I/O on the laptop > > > > > ________________________________ > From: Wes Stewart<[email protected]> > To: elecraft reflector<[email protected]>; Paul Milward > <[email protected]> > Sent: Wed, December 22, 2010 12:20:32 PM > Subject: Re: [Elecraft] muting audio on PSK > > 1) Are you sure it's coming out of the K3 and not the sound card? > > 2) Does transmitter power affect it? > > Wes N7WS > > --- On Wed, 12/22/10, Paul Milward<[email protected]> wrote: > >> From: Paul Milward<[email protected]> >> Subject: Re: [Elecraft] muting audio on PSK >> To: "elecraft reflector"<[email protected]> >> Date: Wednesday, December 22, 2010, 9:50 AM >> Nope >> MON=0 >> the mystery continues >> nu4c >> >> >> >> >> ________________________________ > >> Could this be the Monitor Gain? >> >> Try pressing the bottom right knob to the left of the VFO >> for about a half >> second (HOLD time), the VFO B area should say "MON xx" >> where xx is a number, >> and rotate the knob to a lower setting. This knob is also >> used for >> compression, transmit power, etc. >> >> 73 de Dick, K6KR >> >> >> -----Original Message----- > >> >> Hi folks >> I need a little help. I am using the K3 on PSK a lot. I >> turn the audio gain >> to >> zero and that mutes received audio. However, I cannot find >> a way to mute the >> >> transmit audio (annoying whine). I have rear and reread the >> manual and >> cannot >> find any help. >> Does anyone know how to mute transmit audio on PSK? >> tu >> Paul, NU4C > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
