The first idea that leaps to mind is that your power supply can't supply the combined load.
What are you doing to recycle? Wes N7WS --- On Sun, 12/26/10, Hunsdon Cary III <[email protected]> wrote: > From: Hunsdon Cary III <[email protected]> > Subject: [Elecraft] P3 trouble > To: [email protected] > Date: Sunday, December 26, 2010, 3:36 PM > Reflector: > My P3 Panadpter #888 went together like > clockwork in a few hours earlier today. On receive it > does as advertised and the display is beautiful. > HOWEVER, when I transmit with my K3-100 > on SSB, after 2 seconds or less, the power to the K3 and the > P3 cuts off; when power to the P3 is off, the K3 transmits > A-OK. > I have checked to be sure that my cables > are properly connected and they are...the P3 is drawing > power from the 12VDC jack on the rear of the K3. > Any ideas on what might be causing this > problem....BTW, I used an antistatic mat and was grounded > during the assembly process. > Any help will be appreciated! > 73, > "H" Cary, K4TM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
