Phil, Yes, you should have clipped those jumpers. If they are not clipped the results will be as you describe (guess how I know).
73, Don W3FPR On 12/27/2010 6:23 PM, Phillip Shepard wrote: > I have K3 s/n 1826 that I love. I just installed a KXV3 (not KXV3A) I/F > adapter. The problem is that when I try to do the Milliwatt TX Gain > Calibration procedure, I get errors. I connected a dummy load to the XVTR > jack and put the KXV3 into TEST mode. The procedure looks fine on 160 M, > yielding 1.00 mW. The other bands give low or 0.00 readings and return the > TXG error. Am I doing something wrong? Should I have clipped the W1 and W2 > jumpers on the RF PCB? Thanks for your help. > > 73, > > Phil, NS7P > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
