On 12/28/2010 8:34 AM, Jim Sheldon wrote: > I'm completely new to the world of the K3 and P3, but I actually can answer > this one for you guys. There is a parameter located in the P3 called "Set > the refresh rate (ms). If this is set to a large number the display will > only refresh that often. If it happens to be set to 500 ms (1/2 second) or > even higher the display will appear very jerky. Set that parameter down to > around zero and you'll get quick sweeps that won't appear jerky at all. > > Jim - W0EB Thanks, Jim. That helped; however, part of the jumpiness is (apparently) related to the fact that when the K3 is tuned, the P3 switches out of "Average" mode. If I set Averaging to 2 (or off), and the refresh rate to 0, the display is stable when tuning the K3.
73, Bob K5SM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
