I was asked by John, K0VET, to verify a behavior he observed last night on his K3. He was playing with HRD and found that by changing the IF Shift while transmitting that it took him off frequency. He demonstrated it for me and sure enough, his radio went off frequency (1.947 LSB).
I fired up the K3 utility and issuing the following commands, "IS 0500;" and "IS 1800;" I was able to replicate the behavior on my K3. As soon as I stopped transmitting and transmitted again I was back on frequency even though the shift was still in effect on RX. So, what I surmise is that the IF shift is not locked out on the CAT port while transmitting. Both John and I have the latest 4.22 firmware loaded. The front panel Shift control does not exhibit this behavior. 73, de Nate N0NB >> -- "The optimist proclaims that we live in the best of all possible worlds. The pessimist fears this is true." Ham radio, Linux, bikes, and more: http://n0nb.us/index.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
