>On the 1st i have: Main rx: 2.7 / 2.1 & 400hz for cw Those are pretty good choices. I have settled on 2.7, 1.8, and 250.
I "told" the K3 that the 1.8 was 2.1, so the 1.8 switches in at dsp bw = 2.1. Just normalize, then use only HI CUT until FL2 switches in. The 1.8 sounds great that way on SSB. You can go much lower with HI CUT if QRM is heavy. I "told" the K3 that the 250 was 400, so the 250 switches in at dsp bw = 400. The 250 works great for CW and RTTY. On RTTY, even with dsp bw = 300, you get a nice symmetrical FFT/waterfall, with no visible attenuation at the mark or space frequency. Dave Hachadorian, K6LL Yuma, AZ . ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
