Werner, Do you have the header for the AUX DC cable from the KPA100 installed in your KAT100? In other words, do you have the KAT100-2? If so, there is no need for the power cable to the KAT100, it will be powered from the cable to the KPA100.
73, Don W3FPR On 1/4/2011 11:07 AM, Dr. Werner Furlan wrote: > I have built the KAT100 and KPA100 into a custom EC2 housing and it is > working very well, > there is only one little "problem" in the setting which I do not like. The > combo needs two power > supply cables, one for the high current into the KPA100 (Anderson connectors) > and one for the > KAT100 (round plug like in the K2). I'd like to power the unit with only one > power cable into the > AP connector. Did anybody already find an elegant solution for this? I'd > prefer to have the > necessary cables inside the EC2 not a Y-cable outside. > > 73! > Werner oe9fwv > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
