Werner, From prior photos that I have seen, you have great milling capabilities, but the KPA100 speaker is exposed through the heatsink (no need for any milling). The only problem for using the KPA100 speaker is that you have to run a separate cable for the speaker (and provide an input to the EC2). Most just ignore the KPA100 speaker and use the speaker in the K2 QRP cover.
OTOH, if you want a front firing speaker, and are willing to use another EC2 enclosure, the SP2 speaker project (that never made production) is detailed on the Elecraft website. 73, Don W3FPR On 1/4/2011 6:30 PM, Dr. Werner Furlan wrote: > hi Don, Gary, Bill, > > Don Wilhelm schrieb am 4 Jan 2011 um 13:47: > >> Do you have the header for the AUX DC cable from the KPA100 installed in >> your KAT100? In other words, do you have the KAT100-2? If so, there is no >> need for the power cable to the KAT100, it will be powered from the cable >> to the KPA100. > yes Don, you are right! Everything works like you, Bill and Gary described. > I don't know what I did wrong before. I have the 12V header installed, maybe > I had forgotten to > connect the AUX/IO cable or whatever. I'll change my powercable now. > > btw, the EC2 project is making progress. The rear panel is finished, the > opening for the > loudspeaker is still missing. This will be the toughest part of all. The > Aluminium material of the > EC2 is of low quality, it is not possible to make my first draft with the > milling machine. We will > produce something different. I'll send you a picture in a private mail. > > 73! > Werner oe9fwv > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
