Just use N1MM with the MMTTY plug-in and be done with it. You clearly have a computer, every compute made seems to have a sound card good enough to support this task. Two audio cables, ASFK-A using VOX and you're good to go. Be sure to set 45 BPS tho. Pick a mark frequency and be sure to set the K3 and MMTTY to the same. (I prefer 915 as I like to listen to the audio and other tones are too annoying.)
Wes N7WS --- On Wed, 1/5/11, robt...@comcast.net <robt...@comcast.net> wrote: > From: robt...@comcast.net <robt...@comcast.net> > Subject: [Elecraft] K3 Software for RTTY > To: "Elecraft" <Elecraft@mailman.qth.net> > Date: Wednesday, January 5, 2011, 11:10 AM > > > > With the ARRL RTTY Roundup coming up, I'm having difficulty > choosing a software control and logging program. > > > > N1MM needs audio cables to and from the K3 for RTTY and yet > the K3 user manual states “The K3 directly supports > CW/PSK31/RTTY ASCII text transmit and receive via its RS232 > port.” I do have the RS232 to USB cable installed . Am I > not reading it correctly or should I look at another > program? Suggestions are welcome. > > Robert > > W9RKK > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
