Yes, I definitely have the MIC SEL set to LINE IN and the LINE IN gain at 30.
On 1/8/2011 1:57 PM, John Ragle wrote: > Check in particular... > > MIC SEL = LINE IN > > also > > LIN IN set to ~10-30 depending on band... > > My mic gain runs about "LINE 30" and the SignaLink (IF USING) has TX @ > 9 O'Clock and RX @ 11 or 12 O'Clock. (Again, IF USING SignaLink, both > jumpers that deal with audio olume are set to the "high" setting...see > instructions.) > > John Ragle -- W1ZI > > ===== > > On 1/8/2011 1:47 PM, Jim Littlefield wrote: >> Just got my new K3 and everything is great about it except, sound card >> data modes (PSK31, etc.) are not working. I put the radio in Data A >> mode. When I transmit, the rig is keyed, I can hear audio via the >> monitor function, but nothing is transmitted. I have tried cranking the >> Mic gain (actually the line in gain) way up, but that doesn't help. I >> have also confirmed the transmitter is not in test mode. >> >> Any suggestions? >> > > -- 73 de Jim Littlefield WN1X ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
